Removable means that the Lil’ Mynx is not bolted to the floor or ceiling. After the initial installation it takes only seconds to put up or take down, with no tools needed.

Our unique ceiling mount, which is disguised as a plant hook for discretion, along with a threaded compression system and rubber feet on the base hold the Lil’ Mynx in place. The Lil’ Mynx Pro Pole also comes with a friction ceiling mount that does not require a bolt into the ceiling, although you must still find a joist to straddle. Keep in mind this is held in place by friction and cannot withstand as large a side load as the bolted mount.

The ceiling mount requires only a single screw and can easily be covered with spackle when you move. The rubber feet on the base that grip the carpet for traction cause no damage.

Not a problem, Just order a “Under 8′ Custom” pole, fill in the “Ceiling Height” box, and we will custom make your pole to fit your ceiling with maximum danceable pole (the extension tube will only stick out an inch or two). Your custom pole is adjustable to 12″ above your ceiling height.

No problem. Go to our mounts section and order the Vaulted Ceiling Mount. Keep in mind that you will still be limited to 10 feet maximum height. This mount does not look like a plant hook. It is just a mount.

We have a small pad available for use on non-carpeted flooring.

 

The colored poles are powder-coated and have the most grip, good for climbing and hanging. The polished stainless steel poles have a smoother slick finish, which is good for spins but a little harder to climb.

Although it is not necessary to use a professional we highly recommend it if you are not absolutely sure how to do the installation yourself.

First re-measure your floor to ceiling height. The Lil’ Mynx comes standard to fit any size ceiling between 8-9′, 9-10′ or 8-10′ based on your Lil’ Mynx model. If just after receiving your pole you realize your ceiling height is less than 8 feet you need to ship your pole back to have it modified to fit your room. You will be responsible for all shipping costs and there may be some cost associated with the modification. There may be some restrictions when asking to modify an older pole (one that has been installed and used). Please call us to discuss your needs, (877) 700-7467. Under no circumstances should you try to modify the Lil’ Mynx yourself.

 

If your ceiling is between the specified height range of your model, you will want the pole assembly to be 1 to 1.25 inches longer than that length. Next, as long as your height is within those parameters you can adjust the pole length by rotating the adjustment tube while applying slight pressure towards the foot of the pole. Turn clockwise to shorten, counter clockwise to lengthen. Click Here For Example

 

The hook has no function other than to disguise the mount. It does not hold the pole in place. When you do not have your Lil’ Mynx in place all that is left is a functional plant hook. Hopefully this will eliminate any awkward questions your family or friends may ask about the mount.

While you can move your ceiling mount from room to room (not recommended), it is much more convenient to place a mount in each room you plan to use your Lil’ Mynx Dance Pole. Additional mounts are available in our online store.

You should allow for enough room to do any dancing and/or pole tricks without obstruction. Use common sense.

We recommend that you clean your Lil’ Mynx Colors with a damp cloth. Window cleaner works well and is safe because it is diluted. Do no use solvents, such as alcohol.

It is recommended that the Lil’ Mynx be stored horizontally. This will insure that it has no chance of falling over causing injury to any person or damaging the finish.

Your Lil’ Mynx arrives in a plain brown box with a return address from Pacific International Marketing & Promotions, Inc.

 

Lil' Mynx Original and  Lil’ Mynx Original and
Rotator Poles

Pro Pole shipping box

 

Dance poles and extensions are shipped via FedEx. All other items are sent U.S.P.S. All packages must be signed for (please contact us if you would like the signature requirement waived).

Yes, yes we do! Simply select either a “Under 8′ Custom” or “Over 8′ Custom” pole and fill in the “Ceiling Height” box and we will custom make you pole to fit your ceiling height with maximum danceable pole (extension tube will only stick out an inch or two). Your custom pole is adjustable up to 12 inches above your ceiling height.

 

The Lil’ Mynx is available as either 45 or 50mm.

Yes, The Lil’ Mynx “Rotator” is a combination spinning/stationary removable dance pole. The “Rotator” has a smart designed bearing assembly in the base that allows the pole to rotate freely. With the simple push of a button your Lil’ Mynx can change from a static pole to rotating. It’s like 2 poles in 1!

If the pin is too hard or too easy to push/pull you can adjust the tension on the pin with the small screw in the base that faces the pin. This is the spring plunger that makes it click. If you want less tension, turn the screw 1/8 of a turn counter clockwise and check. If you want more tension, turn the screw 1/8 of a turn clockwise and check.

The Original Lil’ Mynx is a stationary removable dance pole. This pole does not spin. The Lil’ Mynx “Rotator” is a combination spinning/stationary removable dance pole. The “Rotator” has a smart designed bearing assembly in the base that allows the pole to rotate freely. With the simple push of a button your Lil’ Mynx can change from a static pole to rotating. It’s like 2 poles in 1! Other than the bearing assembly and lockout button both poles share the same installation and quality features.

No, unfortunately plaster is too brittle.

Yes, but you will need to get a “toggle/ butterfly” bolt. These are the ones that pop open after they go through the ceiling. You can find this and an appropriate drill bit from your local hardware store. Be sure the screw is 1/4 inch diameter. You may also consider the Pro Pole with the friction mount. Be aware though that the friction mount has limitations to side load.

Yes, but you will need to get a concrete anchor and a masonary drill bit from your local hardware store. Be sure the anchor is 1/4 inch diameter.

Load More

X